Devilbiss GTi Pro Lite PISTOLA A SPRUZZO CUTTING EDGE Performance gtipro-lite


  • Prezzo: € 400,00
  • Costi di Spedizione: € 10,00
  • Disponibilità: 1 pezzo/i
  • Tempo di imballaggio: 3 giorno/i
  • Ubicazione oggetto: Mappa
DeVilbiss GTi Pro LITE gravity feed spray gun.

specify what set-up you require when ordering

Air cap:
HV30
TE10
TE20
T110

Fluid tip:
Either 1.3mm + 1.2mm
Or 1.3mm + 1.4mm

Colour :
Black
Blue
Gold


Every spraygun has a 1.3mm nozzle set-up with a spare 1.2mm or 1.4mm fluid nozzle in the box.


T110 - Clearcoat (higher solids) and super smooth finishing

High performance Trans-Tech atomisation technology best suited to clearcoating and glosses.

This aircap brings new levels of performance, particularly in the application of the latest compliant clearcoats.

It also scores highly in its ability to eradicate dimple defects that can occur with low solvent clearcoats; does not have the same transfer efficiency of the other caps though.

As OEM finishes are not that smooth, does not always suit such as when using lower solid technology.

Particularly suited to classic car finishers or industrial applications as it applies like glass.

Air consumption: 9.4cfm- 265l/min.


TE20 - Faster flow gloss/lacquer

All round gloss / clearcoat gun.

Flow rate and fan pattern lend themselves towards a wetter application style.

Compliant trans-tech high transfer efficiency (but not HVLP)

Fluid tip sizes available: 1.2, 1.3 and 1.4.  For 2K gloss / clear the 1.3 is by far the most popular choice and is recommended by the majority of paint manufacturers for their HS 2K products.

Atomisation Technology: High Efficiency

Air Flow L/min: 360 (12.7 cfm)

Fluid g/m: 170 - 200

Pattern Height: 285 - 300mm


HV30 - HVLP Max Transfer efficiency

This aircap delivers maximum transfer efficiency rates so is particularly suitable for waterborne basecoat application.

Air Flow L/min: 460 (16.3 cfm)

Fluid g/m: 160 - 190

Pattern Height: 300 - 325mm


TE10 - Solvent & all rounder

Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.

Suits basecoat application in a more traditional (non HVLP) style.

Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.

This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.

Atomisation Technology: High Efficiency

Air Flow L/min: 270 (9.5 cfm)

Fluid g/m: 160 - 190

Pattern Height: 290 - 310mm

 

The boxed kit includes:
The complete anodized gun - Available in colours; black, blue or gold
Gravity cup with paint filter
Set of four coloured identification rings
Torx driver/screwdriver
Cleaning brush
Combination spanner
Instruction/spare parts manual

 

Technical Specifications
- Cup Capacity: 560ml
- Weight (gun only): 446g
- Weight (gun & cup): 629g
- Air Cap: Plated Brass
- Air Cap Retaining Ring: Clear Anodised aluminium
- Fluid Tips: Stainless Steel
- Fluid Needle: Stainless Steel
- Air Inlet Thread: 1/4” Universal

button_leftbutton_rightbutton_leftbutton_right